Specification:
1.Model: LD006A
2. Temperature range: 200-480 degrees
3. Heating time: 7 seconds
4. Power: 8W
5. Includes: USB cable, a soldering iron tip, 2 solder wires, a bracket, user manual
6. Packaging: color box
7. Maximum continuous working time: 1 hour
Technical Parameters:
1. Lithium battery: 3.7V 1800 mAH
2. Electrical equipment: 5V
3. The charging current is limited to 1.6A (it takes 1.5 to 2 hours to fully charge)
4. When the charging voltage is higher than 6V, charging will stop and the power off indicator light will flash red.
5.Battery power indicator:
Red indicator light: 30% battery;
Green indicator light 1 is on: the battery is 60%;
Green indicator light 2 is on: the battery is 100%;
6. When charging, the corresponding indicator light flashes. When the battery is fully charged, all three indicators will be on.
7. When the battery voltage is lower than 3V, the battery will be charged with a small current and the red indicator light will flash.
8. When the battery voltage is lower than 3V, it needs to be charged.
9. The product does not work when charging
Work indicators:
1. During work, when the soldering iron tip is short-circuited or has no output, the red indicator light will flash.
2. Heating process: First, after 12 seconds, the red light turns on, the red light turns off, the green light turns on, and the user can operate.
3. Stop working when the voltage is lower than 2.8V.
4. Self-discharge is less than 25uA when there is no operation.
Key Function:
1. The touch function needs to be activated for first time use. Press the power button three times in succession, the work indicator light flashes red, and the touch function is turned on.
2. Touch reset function: Press the power button six times continuously, the working indicator light flashes green, and the touch function reset is completed. Touch reset is a function that re-adjusts the environment when the touch fails due to external interference (when the touch is turned on or reset, do not put your finger on the touch button, otherwise it will not work)
3. Turn off touch function: Press the power button 8 times continuously. When the indicator light on the working light is red, the touch function will be turned off.
4. Turn on the phone, press and hold the power button for 3 seconds, turn on the power indicator light. Turn off the power, press and hold the power button for 0.3 seconds, turn off the power indicator light. When not in use, the lithium battery will automatically turn off after 120 seconds.
Warn:
1. When this tool is not in use, it must be placed on a shelf.
2. Children are not allowed to play with this product, and children are not allowed to perform cleaning and user maintenance without supervision.
4. This device contains a rechargeable lithium battery.
5. The product must be cooled before charging.
6. Do not expose the battery to strong sunlight for a long time, nor place it on a heater, otherwise the heat will damage the battery and cause an explosion. 7. Before charging, please check whether the output voltage of the charging adapter is normal 5~6V and the current capacity is not less than 1.6A. Estimated charging time is approximately 1.5 to 2 hours.
8. Before scrapping, the battery must be removed from the device; how to remove the battery: unscrew 5 screws on the casing, then open the casing and unplug the battery connector.
9. When taking out the battery, you must disconnect the device from the power source and dispose of the battery properly.
11. The equipment must be disconnected from the power supply before cleaning or other maintenance is performed.
Maintain:
1. Disconnect the device before cleaning.
2. Clean the device with a dry cloth.
3. If you do not want to use this device for a period of time, please store it in a dry and ventilated place. Please keep it out of reach of children.
Disposal method:
Waste electronic products should not be disposed of with household waste. Please recycle where facilities are available. Please check with your local authority or retailer for recycling advice.
Reviews
There are no reviews yet.